B O AT S & H A R B O R S

Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337

TELL ‘EM YOU SAW IT IN BOATS & HARBORS

SECOND OCTOBER ISSUE 2008 - PAGE 3

CHECK OUR NEW LOWER PRICES

NEW # GENERATORS # NEW

1500 W ATT GASOLINE GENERATOR AG1500

Frequency: 60 Hz • Voltage (AC): 120v/240v • Rated AC Power: 1000w • Max AC Power: 1200w AC Current: 10 Amps • DC Output: 12v/8.3A • Engine Speed: 3600 RPM • Starting Mode: Recoil

SNATCH BLOCKS

BLOC1020 BLOC1030 BLOC1040 BLOC1050 BLOC1060 BLOC1070 3” 4” 5” 6” 8” 10”

1 /2 Ton 1 Ton 1 1/2 Ton 2 Ton 4 Ton 5 Ton

HD HD HD HD HD HD XHD XHD XHD XHD

$ 21.99 $ 35.99 $ 61.99 $ 68.85 $108.50 $199.95 $ 34.00 $ 65.22 $105.90 $130.13

Wt. Wt. Wt. Wt. Wt. Wt. Wt. Wt. Wt. Wt.

3.5 7.0 12.5 21.0 31.5 66.5 5.0 7.5 13.0 34.5

Engine Model AX152F is a 7 hp, single cylinder, direct injection, vertical, 2-stroke, air cooled unit. Features Low oil warning stop device. Fuel tank capacity is 1.3 gallons.

Item #AG1500 Wt. 40lbs - Our Price.............$139.95 Item #AL2500 Wt. 98lbs - Our Price..............$289.95

FULL 90 DAY WARRANTY AND REPLACEMENT PARTS AVAILABLE

BLOC1079 3” 2 Ton BLOC1080 4.5” 4 Ton BLOC1090 6” 8 Ton BLOC1100 8” 8 Ton

TAIL BOARD BLOCKS

3000 W ATT GASOLINE GENERATOR AC3500

Frequency: 60 Hz • Voltage (AC): 120v/240v Rated AC Power: 3300w • Max AC Power: 3600w AC Current: 120v/30 Amps, 240v/15 Amps • DC Output: 12v/8.3A Engine Speed: 3600 rpm • Starting Mode: Recoil

YARDING BLOCKS

Engine Model AHG170F is a 7 hp, single cylinder, direct injection, vertical, 4-stroke, air cooled OHV unit. Features Low oil warning stop device. Fuel tank cap.is .95 gals.

Item #AC3500 Wt. 109lbs - Our Price.............$349.95

FULL 90 DAY WARRANTY AND REPLACEMENT PARTS AVAILABLE

AC GENERATOR

4500 W - 120/240V $479.50

A powerful 2 bearing generator-alternator to produce std. house current. Heavy copper windings with automatic voltage regulator for constant voltage at 3600 rpm either CW or CCW. Shaft is 28mm dia. x 2-5/8” w/keyway. Requires 10 HP for full output but smaller engine works OK with reduced output. Can be belt driven or direct coupled. Dimen. are 17” x 8-1/2” x 9”. Factory warranty. A terrific buy at our special price. Pulleys Avail. Item #H1061, Wt. 67#........................$479.50

AC GENERATOR

2200 Watts • 120/240 V • Low Cost Electricity

A sturdy 2 bearing brushless generator for cont. duty. Requires 5HP for full output. Has a duplex outlet for std. house current. Can be connected for 240V. if needed. 3600 rpm, 1” diam. keyed shaft. Dimen: 11”L, 8-1/2”H, 7-1/2”W. Late model with solid state rectifier. Easily installed, perfect for boat or cabin. BLOC1108 BLOC1109 BLOC11099 4” 5” 6” $ 22.50 $ 34.30 $ 44.80 Wt. 5.5 Wt. 7.0 Wt. 15.5

BLOC1220 BLOC1230 BLOC1240 BLOC1250 BLOC1260 BLOC1270 BLOC1280 BLOC1290

3” 4” 5” 6” 3” 4” 5” 6”

HD HD HD HD HDG HDG HDG HDG

$ $ $ $ $ $ $ $

22.50 Wt. 5.5 25.95 Wt. 9.0 34.50 Wt. 12.0 39.65 Wt. 15.0 25.99 Wt. 8.0 29.45 Wt. 12.0 40.50 Wt. 14.0 46.80 Wt. 16.0

6500 WATT GENERATOR

All these units are Brushless maintenance free. A powerful generator that requires 13 HP for full output. CW or CCW rotation. Has both 115V & 230V outlets. Circuit Breaker protected. 1-1/8” shaft with keyway. Item #H1276, Wt. 85#....................$695.00

5.5HP GEAR REDUCTION HONDA ENGINES

Sturdy reliable Honda Engine w/6:1 gear reduction to output shaft. Std. 3/4” shaft which turns at 300 to 600 rpm resulting in terrific torque and power recoil start and oil alert. Model GX160K1HX2 Item #H1451...Sale Price $495.45 9HP also available upon request

Air Compressor Switch 13 HP ACME DIESEL ENGINE With or Old engine had it & time for a new one? Without Here’s your chance! New one time deal-limited quant. 13HP 1 cyl. Acme diesel 3600 rpm engine. Electric start quiet mufUn-loader Valve fler system. Large air cleaner, battery charger, spin on fuel filter, & oil pump. Keyed shaft size is 1.5” x 4.5”. Bargain Price Item #H1444 Wt. 110#’s Sale Price $1,350.00 $10.00

Item #H1230, Wt. 45#........$299.50

AIR COMPRESSOR MOTOR

YANMAR DIESEL ENGINE SPECIAL

Brand New Yanmar Diesel engines Model #3TNF74C-EDN, 23 HP continuous, 28 HP maximum 3 cylinder, water cooled. 1.6 litre, 3,000 rpm. Complete from fan to #5 bell housing. Item #ENGI1055 Wt. 400#.....$1,900.00 Also Available - Lister-Petter 4 Cylinder Model @ LPW54 and Mitsubishi 3 cylinder engines 28 HP Model S312-VS. Both engines available with SAE28 hydraulic drive. Clutches offered for all models.

This replacement air compressor duty motor is 2 hp with 5/8” keyed shaft. The frame is S56. It is single phase, 60 Hz and operates at 3450 rpm. the rotation is CCW. End drip proof with reset button. Draws 115/ 230V and 15/7.5 amps. Motor is totally enclosed.

Special purchase and supplies are limited.

Item# H1075......Sale Price........

$79.95

SAND BLASTER

100 LB. CAPACITY

Our most popular model with plenty of capacity for most jobs. Requires only 7 cfm at 80 psi, will work fine with the average 3 HP or 5HP compressor with a working pressure range of 40 to 125 psi. The tank holds up to 100 lbs. of dry silica sand (not incl.). Unit includes 10 ft. of sandblast hose, gun valve, moisture filter, pressure gauge, 3 varisize ceramic tips and a deluxe hood. Sandblasting is the most efficient way to remove rust and corrosion and our special sale price saves you 30%. Item #H1040, Wt. 50#’s

1 HP Thru 20 HP

COMPRESSORS ONLY -

BRIGGS & STRATTON 15.5 ENGINE

This vertical shaft model has a cast iron cylinder and is overhead valve designed for cooler operation and extended life. Electric start w/float carburetor for consistent easy starting. Model #28N707. Tapped 7316”-20, keyway, 1” dia. 3-5/32. Wt. 80 lbs. Item #H1190..........Sale

4 TON RATCHET CABLE HOIST

Up to 8000 lbs. of pulling or 2 tons of hoisting in this powerful compact tool. Complete with 12 ft. of 1/4” flexible steel cable, 5 ft. lift. Item #H493, 2 Ton 10#’s.....................$18.67 Item #H494, Wt. 16#’s.........................$24.50

For those who need only a compressor we offer a selection of rugged powerful units at money saving prices. All are ball bearing units with cast iron cyls. for longer wear. A.S.M.E. tanks available also.

NEW LOW PRICES!

Item #671-10 #672-25 #673-35 #674-50 HP 3 3 5 10 CFM 11.3 13.0 23.1 44.0 PRESS. 150 200 200 200 $ $ $ $ PRICE 249.50 335.00 550.00 779.50

Price $440.00

ATLAS LOAD BINDER

A B

# # # # # # # # # # # # #

$179.50

THOUSANDS OF SMALL ENGINE PARTS AVAILABLE

# # # # # # # # # # # # #

Top Quality 2-Braid Hose w/ Std. Brass Fittings

AIR HOSE SALE

COMPARE THESE PRICES!

P R I C E R E D U C T I O N !

BRASS GATE VALVES

Beautiful brass gate valves, precision built. Full size & full weight. Same as the finest brand name valves that cost you double our low prices. Stock up & have them when you need them. All sizes std. pipe thread. #H433 3/8” #H434 1/2” #H435 3/4” #H436 1” #H437 1-1/4” $ 3.96 $ 4.83 $ 5.76 $ 7.95 $11.76 #H438 1-1/2” #H439 2” #H440 2-1/2” #H441 3” #H442 4” $ $ $ $ $ 15.70 24.40 36.40 43.68 48.38

Secure heavy loads with this Hi Test super strong drop forged load binder. Style A - For 3/8” chain, take up is 4-1/4”, easy cam action. Item #H1159, Wt. 10#.........................................................................$18.69 Item #H1160, (for 1/2” chain Wt. 14#).................................................$35.05 Style B - Ratchet Load Binder, take up on this Ratchet is gradual up to 8”. Drop forged, rugged and reliable. Item #H1161, for 3/8” chain Wt. 14#...................................................$34.50 Item #H1162, for 1/2” chain, Wt. 15#..................................................$39.50

Item #H622, 1/4” x 25’...................................................................$16.91 Item #H623, 3/8” x 25’ (1/4” ftg)................................$18.22 (Hose 1410) Item #H624, 1/4” x 50’...................................................................$21.07 Item #H625, 3/8” x 50’ (1/4” ftg).....................................................$31.30 Item #H626, 1/2” x 50’ ...................................................................$39.96

New Item - SALE!!!

• • • • 50’ Heavy Duty Rubber Discharge Hose Coupled w/Style C & E Aluminum Camlocks 3 Stainless Steel Bands on Each End 150 PSI Working Pressure

P R I C E

CARGO STRAP W/RATCHET

Fast tie down for boats or cargo. Powerful ratchet action. Quick acting easy release. Nylon web construction that is fast and easy handle. The durable nylon will resist weather damage for many years. Our lowest price !! Larger sizes available. Item# H211, 2”x27’ Wire Hook.................................................. Item# H212, 2”x27’ Flat Hook.................................................. Item# H214, 2”x30’ Flat Hook...................................................

FUEL OR WATER HOSE

New Government Surplus • Never Used Still in the Box

6” x 50’ Wt. Ea. 185 lbs.

$175.00 or 2/ $330.00

FAST ACTING BALL VALVES

R E #556 1/2” $ 4.28 #561 2” $ 33.29 #557 3/4” $ 5.27 #1152 2-1/2” $ 90.91 D #558 1” $ 10.87 #1150 3” $ 100.70 #559 1-1/4” $ 11.45 #1151 4” $ 162.54 U #560 1-1/2” $ 21.08 STAINLESS STEEL C 1000 PSI BALL VALVES Sea Water or corrosive fluids may need stainless steel valves. T These are precision made out of #316 stainless steel for long life. Style A are 2 piece, full port valves. Style B are 3 piece & I can be disassembled. Note the new low prices. Style B-3 PC Style A-2 PC O 3/4” #H732A $ 17.06 #H728 3/4” $ 23.81 1” #H724A $ 21.00 #H729 1” $ 30.22 N #H666A 1-1/4” $ 29.85 #H529 1-1/4” $ 47.08 $ 41.88 #H730 #H725A 1-1/2” 1-1/2” $ 55.60 ! $ 73.01 #H731 2” #H736A 2” $ 93.41

Precision Brass Valves w/stainless steel balls & teflon seats. One 90º motion & valve is fully open or closed. Save more than 50%. #H727A 3” $157.18 #H732 3” $242.91

$11.76 $11.62 $12.81

Limited Quantities Available, So Buy Now !!!

HOSE FITTINGS - QUICK COUPLERS

AUTOMATIC PLANER

15 INCH An industrial planer for boatbuilders & millwork shops. Planes boards & timbers up to 15” W. & 6” Thick. rack & pinion w/big handwheel adjusts cut up to 6/32” deep. Power feed rolls move the stock for max. production & safety. “Top of the Line” model w/adjustable feed roll tension, dynamically balanced 3 knife cutter head, stock rollers, in feed roll and out feed roll, chip breaker, safety switch & a big 3 HP single phase 230V motor. Feed rolls are powered by a geared sprocket & chain drive w/all gears running in oil. All shafts run in ball bearings & all working surfaces are precision milled. Dims. ar 26” x 29” x 28”. This type of planer usually sells for 1795.00 but a large purchase makes possible this “one time” price. Item #H1065, Wt. 410#’s.............................................................$800.00

A

Stainless & Cast Iron Available

B C D E

F

Change your screw-on fittings to quick couplers and save hours of labor. These are rust proof aluminum & brass and install easily with hose clamps or standard pipe threads.

Style A. Male Camlok to female ipt Style B. Female Camlok to male ipt Style C. Female Camlok to hose insert

Style D. Female Camlok to female ipt Style E. Male Camlok to hose insert Style F. Male Camlok to male ipt

HOSE

1.5” 2” 3” 4” 6” AAAAA3.50 3.79 7.10 10.00 23.05 B B B B B 7.85 8.35 14.50 20.79 43.32 C C C C C -

SIZES

7.10 8.35 13.69 20.00 50.36 D D D D D 7.55 8.99 14.25 19.05 42.65 E E E E E 3.50 4.55 8.99 12.29 32.75 F F F F F 4.05 4.79 10.39 14.70 35.59

CHECK VALVES

Precision brass check valves Prevent back flow. SAVE 50%

Item #H741-1/2”....$3.80 Item #H742-3/4”....$4.90 Item #H743-1”.......$6.70 Item #H744, 1-1/4”....$9.25 Item #H745, 1-1/2” .$11.25 Item #H746, 2”........$18.95

SUCTION OR DISCHARGE HOSE

Reinforced Tough Easy to Handle

Size 1-1/2” 2” 3” 4” 6”

WINDSHIELD WIPER MOTOR

This universal 12V wiper motor is good for most new or replacement wiper installations. It has three threaded mounting holes & 9/16” ball joint type arm. 100 RPM, 200 strokes per minute. Overall dims are 7” x 3-1/4” x 4”, Wt. 3 lbs. Item #H201.............................................................$29.95

Suction Discharge Set of per ft. per ft. fittings $ .90 $ .48 $ 14.25 1.35 .50 18.49 2.59 .80 29.99 4.15 .95 46.14 7.70 1.85 78.79

FIRE HOSE REJECTS

50’ Lengths NEW Each hose has 1 marked leak which is repairable. Rubber tube w. canvas cover. No couplings. Use as cheap discharge hose or IDEAL as dock bumpers. Other Sizes Available - Call Us Item #H1391, 1-1/2” x 50 ft..................................................................................................$12.50 Item #H1389, 2” x 50 ft........................................................................................................$15.00 Item #H1390, 3” x 50 ft........................................................................................................$30.00

Not an exact illustration • Specify size & Length Suction Hose, Item #H484 • Discharge Hose, Item #H485 This heavy duty PVC hose is extra flexible and long lived. Ideal for contractors service. Resistant to oils, chemicals, acids, & water. Stands temp. up to 170º F. Standard IPT male & female pinlug fittings are installed if specified. Minimum 15 ft.

Prices Subject to Change Without Notice

All Prices F.O.B. Our Plant, Chattanooga, Tenn., the Truckline Center of the U.S.A. Direct lines to every point saves time & money. Send check or money order. No COD Please.

ALLEN MACHINE CO.

P.O.Box 4156,Chattanooga,TN 37405 HOTLINE (423) 756-1414 Call Free To Place Orders - 800-451-8899

www.allenmachineco.com Email: sales@allenmachineco.com

You Must Be Satisfied 14 day Money Back Guarantee

GET A BETTER DEAL FROM ALLEN MACHINE Plus the Fact that Freight Rates from Chattanooga are up to 50% LESS than Rates from Minnesota or Illinois with Faster Service.