ENGRAVING

16. GraverMach®

®

New air pulse porting technology (patent pending) inside the control unit gives each handpiece excellent range of power with perfect control throughout an expanded range of impact speeds. The GraverMach features 400 to 8000 strokes per minute, a newly developed throttle bias adjustment valve for tailoring throttle response to your work and a dual-stage precision air regulator. Advanced ergonomics include front air pressure adjustment, quick change air couplings, rear mount throttle connection, and an advanced valve pulse unit that operates with virtually no noise or vibration. The GraverMach has connections for two impact handpieces plus an auxiliary air connection for other air tools including the GRS Ultra 850 rotary handpieces.

The GraverMach now has an air output in the rear so it is now “Airtact ready”. This is a direct hook-up to Airtact without using T-fittings. Includes U.S. style IEC electrical cord plus Schuko adapter, foot control and multimount air filter. 100-240 Volt, 50-60 Hz. Handpieces sold separately; all GraverMax and GraverMate handpieces can be used with this machine Specifications: Width - 5.2" (132mm) Height - .10.8" (274mm)

ITEM #

32-1151 32-1152

#004-960 GRAVERMACH,110-240V/ 60-50HZ W/OUT HANDPIECE #004-971 AIRTACT HOOK UP KIT FOR 004-529 (GRAVERMAX)**

DESCRIPTION

Compressor not included.

Requires compressed air 1.4cfm at 45 psi minimum (40 lpm. at 3 bar minimum).

17. GraverMax® SC

** If a customer orders Airtact to use with an older style GraverMax they will need one of the hookup kits.

Airtact readyy”

The GRS GraverMax tradition continues with this new design. The new, economical GraverMax SC shares many features with the GraverMach including its new air porting technology, quiet operation and a more ergonomic and compact chassis. There are two main differences: the GraverMax SC uses a single stage precision air regulator in place of the dual-stage GraverMach regulator, and there is no throttle bias adjustment valve.

The GraverMax SC has been upgraded with the same dual-stage precision regulator that is in the GraverMach. Includes U.S. style IEC electrical cord plus Schuko adapter, foot control and multimount air filter. 100-240 Volt, 50-60 Hz. Handpieces sold separately; all GraverMax and GraverMate handpieces can be used with this machine Specifications: Width - 5.2" (132mm) Height - .10.8" (274mm)

ITEM #

32-1154 32-1155

DESCRIPTION

#004-980 GRAVERMAX SC,110-240V/ 60HZ- W/OUT HANDPIECE

Compressor not included.

Requires compressed air 1.4 cfm at 45 psi minimum (40 lpm. at 3 bar minimum).

#004-972 AIRTACT HOOK UP KIT FOR 004-629 (GRAVERMATE)**

18. GRS® System 3

** If a customer orders Airtact to use with an older style GraverMate they will need one of the hookup kits.

An affordable impact tool system that gives a wide range of impact power using compressed air. The System 3 is a comfortable, light weight handpiece made in stainless steel. It allows you to engrave, texture, carve and set stones. Use the foot control to start and vary the impact power needed. System 3 Deluxe Package: Includes handpiece, foot control, air filter-regulator, hand graver handle, 6 QC tool holders, 8 steel points, 2 gravers and instructions.

QC- Quick Change

ITEM #

32-1161 32-1162

System 3 Standard Package: Includes handpiece, foot control, air filter-regulator, 3 QC tool holder, 6 steel points and instructions. Requires compressed air 1.2 cfm at 50 psi minimum. Compressor not included. #004-781 SYSTEM 3 DELUXE PACKAGE

DESCRIPTION

ITEM #

32-1165 32-1166 32-1167

DESCRIPTION

#004-780 SYSTEM 3 STANDARD PACKAGE #004-760 SYSTEM 3 HANDPIECE ONLY

#004-771 SYSTEM 3 FOOT CONTROL ONLY #004-762 AIR FILTER-REGULATOR ONLY

140

© Copyright 2008