FLEXSHAFTS

®

1. SR Motor Flexshaft System - 2220 Kit

Unit Includes:

• SR ball bearing motor 1⁄6 hp, 18,000 rpm with forward and reverse switch • Includes FCT-1 electronic foot control, #20 quick-change handpiece • Ideal for precision prong setting and seat cutting • Wt. 121⁄2 Lbs 54 piece accessory kit rotating bur stand, mounted points, wire and bristle brush, sanding drums, assorted buffs, polishing wheels, compounds and flexshaft grease

ITEM #

34-1011

34-1012

2220 KIT -110V / 60HZ

DESCRIPTION

2220 KIT -220V / 50HZ

• SR ball bearing motor 1⁄6 hp, 18,000 rpm with forward and reverse switch • Includes FCT-1 electronic foot control , #30 handpiece • With Jacobs chuck 0”-5⁄32” (0-4mm) with key (CK-0) • Wt. 121⁄2 Lbs

2. SR Motor Flexshaft System - 2230 Kit

Unit Includes:

54 piece accessory kit rotating bur stand, mounted points, wire and bristle brush, sanding drums, assorted buffs, polishing wheels, compounds and flexshaft grease.

ITEM #

34-1016 34-1017

34-1026

2230 KIT -110V / 60HZ

DESCRIPTION

2230 KIT -220V / 50HZ

• New flexshaft system from FOREDOM® with SR motors • SR ball bearing motor 1⁄6 hp, 18,000 rpm with forward and reverse switch • Handpiece to be ordered separately Wt. 11 Lbs Note: Not for use with HP #30H and #44HT

3. SR Motor and Flexshaft + FCT (Speed Control)

ITEM #

34-1021

DESCRIPTION

4. Electronic Foot Control

34-1022 34-1023

SR MOTOR & SR-FCT 110V / 60HZ

SR MOTOR & SR- FCT 220V / 50HZ

34-1024 SCT: 34-1026 • Wide base design and non-slip floor grip • Speed controller in a metal body • Solid state circuitry for continuous speed variation • Not for use with models H, R, TX and TXH • CSA Listed Wt. 6 lbs FCT: • Solid state, foot operated control • High impact plastic housing, with skid resistant base • Variable speed from low to high • Not for use with models H, R, TX and TXH • CSA Listed Wt. 2 lbs

SR MOTOR & SR-FCT + HANDPIECE 110V / 60HZ #20 HANDPIECE

SR MOTOR & SR- FCT + HANDPIECE 220V / 50HZ

An all purpose, versatile unit that is the key to all model making, die finishing, wood carving, engraving and polishing. Ball bearing motor 1/10 hp, variable speed 0-18,000 rpm. Complete set includes motor, handpiece and foot control.

5. Flexible Shaft Motors

ITEM #

34-1031 34-1032 34-1035 34-1036

SCT-1 /110V/ 60HZ

DESCRIPTION

ITEM #

34-1101 34-1102

SCT-2 /220V/ 50HZ

COMPLETE SET 110V / 60HZ

DESCRIPTION

FCT-1 / 110V / 60HZ

COMPLETE SET 220V / 50HZ

FCT-2 / 220V / 50HZ

© Copyright 2008

158