TG GRAVERS ® 16. TG - Traditional Gravers Made of High-Speed Chrome Tool Steel. Traditional Gravers ONGLETTE: for line engraving, stone setting, inlay work and borders. FLAT: for bright cutting, background removal, lettering and borders. ROUND: for bead raising, block lettering and line engraving. KNIFE: for fine line engraving, deep narrow cuts and inlay work. SIZE #5/0 #4/0 #3/0 #2/0 #0 #1 #2 #3 #4 #5 #6 #7 #8 A TG ONGLETTE IKOHE ITEM # 1.16 1.24 1.35 1.45 1.58 1.78 1.94 2.16 2.54 2.74 2.94 3.14 3.36 A MM (HSS) 37-1696 37-1697 37-1698 37-1699 37-1700 37-1701 37-1702 37-1703 37-1704 37-1705 37-1706 37-1707 37-1708 #022-696 #022-697 #022-698 #022-699 #022-700 #022-701 #022-702 #022-703 #022-704 #022-705 #022-706 #022-707 #022-708 GRS ITEM # SIZE #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47 #48 #49 A TG FLAT A MM 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 37-1736 37-1737 37-1738 37-1739 37-1740 37-1741 37-1742 37-1743 37-1744 37-1745 37-1746 37-1747 37-1748 37-1749 IKOHE ITEM # (HSS) #022-736 #022-737 #022-738 #022-739 #022-740 #022-741 #022-742 #022-743 #022-744 #022-745 #022-746 #022-747 #022-748 #022-749 GRS ITEM # SIZE #50 #51 #52 #53 #54 #55 #56 #57 #58 #59 #60 #61 #62 #63 A TG ROUND A MM 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 37-1750 37-1751 37-1752 37-1753 37-1754 37-1755 37-1756 37-1757 37-1758 37-1759 37-1760 37-1761 37-1762 37-1763 IKOHE ITEM # (HSS) #022-750 #022-751 #022-752 #022-753 #022-754 #022-755 #022-756 #022-757 #022-758 #022-759 #022-760 #022-761 #022-762 #022-763 GRS ITEM # A SIZE K-0 K-1 K-2 K-3 K-4 K-5 K-6 K-7 TG KNIFE A MM 2.2 2.4 2.6 2.8 3.0 3.2 1.8 2.0 37-1772 37-1773 37-1774 37-1775 37-1776 37-1777 37-1770 37-1771 IKOHE ITEM # (HSS) #022-770 #022-771 #022-772 #022-773 #022-774 #022-775 #022-776 #022-777 GRS ITEM # TG Tr a d it i o na l Gravers Knife and Bevel Gravers (High Speed Steel) Knife gravers for fine line engraving, deep and narrow cuts, inlay work, stone setting. Bevel gravers for bead raising and material removal. BEVEL (HSS) GRS ITEM # SIZE #1 #2 37-1792 37-1793 IKOHE ITEM # Belt Sander Set-up for Graver Sharpening #002-702 #002-703 Use the belt sander with a diamond micro-finishing belt for sharpening high speed steel and tungsten gravers. See page # 7 17. GRS® Burnish Tool & Rd. Blank A special tool made of tungsten carbide, used for burnishing or “Gypsy” stone setting. The round TC blank is perfect for making texturing tools. 18. GRS® Glensteel Gravers Made of special High Speed Steel (cobalt free). Fits all GRS impact handpieces and QC holders. 37-1781 37-1783 19. GRS Hand Chuck Two-jaw precision hand chuck is made of hardened and ground steel. Superior V notch grip. Size 2” (51mm) long. 37-1782 ITEM # 37-1797 37-1798 #022-347 ROUND ⁄8” X 1 ⁄2” #022-346 B/TOOL ⁄32” 3 1 1 DESCRIPTION ITEM # 37-1781 37-1782 37-1783 #002-115 A1 SQUARE #002-116 A2- FLAT #002-120 A3-BLANK DESCRIPTION ITEM # 37-2015 #004-000 HAND CHUCK © Copyright 2008 DESCRIPTION 180 previous page next page