3. Peddinghaus Gold and Silversmithing Anvils HAMMERS ® Superior quality forming and raising stakes designed to fit the universal working block. Anvils and stakes are made in drop forged tool steel, hardened, ground and polished to a mirror finish. Made in Germany to DIN standards. Needle Case Anvil - #1-01 16MM Needle case anvil, one flat and one rounded end. 14MM Needle Case Anvil - #4-01 Needle case anvil, one flat and one round pointed beck. 14MM 10MM 600MM 38-1071 WT. 4000g 38-1072 WT. 4000g 600MM Blowhorn Anvil - #10-01 Blowhorn anvil. Fretting Anvil - #19-01 33MM 12MM Rounded highly polished working surface. 38-1073 7000g 700MM 38-1074 6000g 325MM Domed Square Stake 60mm Dome face with four radii corners, dull polished. Flat Square Stake 60mm Flat face, two radii and two sharp corners, dull polished. High Dome Round Stake 65mm Ø with dull polished high dome. 65mm Flat Round Stake 65mm 65mm Ø with dull polished flat round stake. 38-1081 83-01(1) 2KG 38-1082 83-01(2) 2KG 38-1083 83-01(3) 2KG 38-1084 83-01(4) 2KG Universal Working Block The Peddinghaus forming block is designed with a wide variety of unique shapes. Made of hardened, tempered highly polished tool steel, this solid block accommodates all the different types of stakes and anvils. Dimensions: 47⁄8” X 47⁄8” 38-1080 9.5 KG Hatchet Stake Dull polished, straight face, one side rounded face. 270mm 80mm Mushroom Stake-Low Dome 260mm Socket, round face, bowed to the middle, working surface fine polished. 40mm Mushroom Stake-High Dome 260mm Socket, face high bowed, working face fine polished. 40mm Flat Round Stake 260mm Socket, flat face, working face fine polished. 40mm Dome Round Stake 260mm 38-1091 35.01 1KG Socket, face flat bowed, working face fine polished. 40mm Flat Square Stake 290mm 38-1092 41.01 1KG Socket, flat face, working face fine polished. 50mm 38-1093 42.01 1KG 38-1094 39.01 1KG 38-1095 40.01 1KG 39-1096 43.01 1.6KG 186 © Copyright 2008 previous page next page