PLATING

®

6. Rhodinette Pen Plater

Suitable for both shop and industry. The ergonomically designed electrode pen ensures easy handling and the platinum contact guarantees consistent metal deposition. This fiber tipped pen may be used for partial electroplating of jewelry and other small items. It makes two tone effects much easier to produce and it is not always necessary to resort to masking areas.

ITEM #

Spares for Rhodinette

ITEM # Unit Includes: Rectifier unit, red anode pen with fiber tip, black lead

40-1031 40-1032 40-1033 40-1034 40-1036

40-1032 40-1036

40-1030

RHODINETTE PEN PLATER 110V / 220V / 6W

DESCRIPTION

DESCRIPTION

RHODINETTE PLATING PEN - GERMAN FIBER TIP -REGULAR FIBER TIP -YELLOW FIBER TIP -SUPER POINT FINE POINT CHISEL TIP

wire with clip, five regular fiber tips, one glass container and instructions. (Plating solution not included)

40-1035* 40-1037* 40-1038* 40-1040* 40-1041*

40-1033 40-1034 40-1031

WIELAND STOP-OFF PEN CONTACT PLATE

CLAMP WIRE FOR RHODINETTE GLASS JAR- YELLOW GLASS JAR- BLACK GLASS JAR- RED

40-1042*

* picture not shown

Suitable for use with all pen platers for designer work. These are specially formulated solutions for partial electroplating articles of jewelry. Plating layers applied by these solutions are relatively thin. Please call for pricing.

7. Pen Plating Solutions

ITEM #

40-1044 40-1045 40-1046 40-1047 40-1051 40-1052 40-1055 40-1056

FINE GOLD

DESCRIPTION

YELLOW GOLD PALE GOLD RED GOLD

2G/100ML

2G/100ML 2G/100ML 100ML 2G/100ML

2G/100ML

BRIGHT RHODIUM BLACK RHODIUM NICKEL COPPER

2G/100ML

Wieland Gold and Rhodium plating baths are available. Call for details

8. Stop-off DYKEM Blue

A very effective solution that may be used to mask areas that do not need to be plated. May be cleaned after use with acetone.

Electroplating is a process of metal deposition in a thin layer over an item of jewelry. Surface finish and cleaning is of utmost importance to get the best results in electroplating. It is the quality of finish prior to plating that dictates the final appearance. From practical experience it is a known fact that all items after buffing and polishing must be immersed in an ultrasonic unit for at least 20 minutes. Subsequently the items must be steam cleaned before plating. When mixing plating solutions, always add salt to the solution. Never add water to the salt or concentrated solution. Safety Instructions: • Work in a well ventilated and clean area • Wear proper eye and skin protection • Do not ingest or inhale fumes • All chemicals must be labeled and stored in tightly closed containers • Obey federal, state and local regulations for disposal of spent chemicals and waste

Guidelines for Electroplating

100ML

ITEM #

40-1197

DYKEM BLUE 8 OZ

DESCRIPTION

202

© Copyright 2008