® A unit that features both a plating rectifier and a pen plater. Plating Rectifier: This is the power source for direct current that is needed for electroplating and electro stripping. Solid state circuitry delivers filtered DC output. A variable voltage and amperage determines the size of the bath and the surface area that can be plated. The control panel has an amp/volt meter, regulator and an on/off switch. Micro Pen Plater: This is a built-in unit with a fiber tipped pen. It is designed to plate small and hard to reach areas in jewelry, designs and to touch up repairs. 9. Plating Rectifier 30A with Micro Pen Plater PLATING 40-1015 40-1012/13 ITEM # 40-1012 40-1013 40-1014 40-1015 RECTIFIER / PEN PLATER SET - 110V RED / BLACK LEAD WIRE DESCRIPTION RECTIFIER / PEN PLATER SET - 220V PLATING PEN WITH CLAMP (RED & BLACK) Unit Includes: Rectifier 30A output continuous duty, 12V-DC Maximum 4.5 gal. plating baths, one red, one black lead wire with alligator clips. Dimensions: 12 x 14 x 9” Wt. 14lb 40-1015: Plating pen to be ordered seprately 40-1014 10. Plating Rectifier 30A A heavy duty rectifier suitable for both electroplating and electro stripping operations. Filtered DC output, with precision voltage/amperage regulation. A remarkable system that features both a plating rectifier and a pen plater. The control panel has an amp/volt meter, regulator and an on/off switch. Maximum 4.5 gal. plating baths. 40-1017 40-1014 ITEM # 40-1017 40-1014 PLATING RECTIFIER 110V / 220V-30A RED/BLACK LEAD WIRE DESCRIPTION Unit Includes: Rectifier 30A output heavy duty, 12V-DC Maximum 4.5 gal. plating baths, one red, one black lead wire with alligator clips. Dimensions: 12 x 14 x 10” Wt. 14 lb 11. Mini-Plating System Features: • • • • • • Compact, lightweight table top unit for electrocleaning, electrostripping and electroplating Ideal for plating silver, gold and rhodium Includes 600 ml beakers for electrocleaning, neutralizing and plating Automatic bath agitation Integrated circuitry with voltage/current regulation Dual voltage 110/220V - switchable 12. Fume Hood 40-1021: Three Beaker Plating Unit Dimensions: 330 x 210 x 290mm Wt. 10.5 lbs. Rectifier 12 Amps / 8 volts Bench Fume Hood with light • Economical lightweight table top unit for use when plating or electro-stripping • Constructed in epoxy coated steel • Includes a suction motor and internal light • Supplied with hoses and clamps • Dimension 310 x 280 x 290 mm. Wt. 22 lbs. ITEM # 40-1021 PLATING UNIT -110V/220V DESCRIPTION ITEM # 40-1028 40-1029 FUME HOOD 110V DESCRIPTION FUME HOOD 220V © Copyright 2008 203 previous page next page