DRAWPLATES

®

19. Hardened Tool Steel Draw Plates - Italy

Premium quality, hardened steel draw plates with numerous highly polished holes to draw wire down gradually. Always use Bur Lube as a lubricant to draw smoothly and protect the die plate from frictional heat.

ITEM #

44-1201 44-1202 44-1203 44-1212 44-1213 44-1215

PROFILE

44-1221 44-1225 44-1231 44-1241 44-1251

ROUND ROUND ROUND HALF RND. HALF RND. HALF RND. SQUARE SQUARE OVAL TRIANGLE STAR

SHAPE

2.00-0.30mm 3.00-0.50mm 6.00-3.00mm 4.00-1.00mm 3.00-1.00mm 6.00-3.00mm

RANGE

HOLES

31 31 31 20 20 31

3.00-1.00mm 6.00-3.00mm 3.00-1.00mm 3.00-1.00mm 3.00-1.00mm

20 31 20 20 20

20. Tungsten Carbide Draw Plates - Deluxe

Draw plates have mirror finished carbide inserts for drawing extremely bright, super smooth round wire. Wear resistant carbide is ten times longer lasting than die steel. Use Bur Lube to draw with reduced friction. Made in Taiwan.

ITEM #

44-1261 44-1262 44-1263 44-1267

PROFILE

ROUND ROUND ROUND ROUND

SHAPE

0.245-0.12mm 1.000-0.26mm 2.200-0.26mm 6.000-2.30mm

RANGE

HOLES

24 24 36 24

21. Tungsten Carbide Draw Plates- Value

26-3001

Bur Lube Makes Wire Drawing Easy

See page # 80

Specialty draw plates with mirror finished wear resistant carbide inserts. Different shapes: round, half-round, square, hexagonal and oval. All sizes clearly marked on the plates. Use Bur Lube to draw with reduced friction.

ITEM #

44-1271 44-1272 44-1281 44-1291 44-1292

PROFILE

For Draw Benches see pg# 241

44-1293 44-1301 44-1303 44-1311

ROUND ROUND HALF RND. SQUARE SQUARE SQUARE HEXAGON HEXAGON OVAL

SHAPE

2.20-0.26mm 6.00-2.30mm 3.00-0.50mm 3.50-0.80mm 3.00-0.55mm 3.00-1.00mm 3.50-0.80mm 5.00-2.10mm 5.00-4.00mm

RANGE

HOLES

36 24 21 36 24 20 30 30 20

© Copyright 2008

242