MANDRELS ® Flange Ø THD 93. Mandrels-Screw ITEM # 21-2701 21-2702 21-2705 21-2706 21-2709 • Mandrels for abrasive wheels, cutting discs and bristle brushes • Use in flexshaft handpiece • Thread ends are right handed Bx/12 21-2701 21-2702 21-2705 21-2706 21-2709 SHANK 3 3 3 1 1 /32” /32” /32” /8” /8” 3 3 3 3 7 HEAD Ø /16” /16” /16” /16” /16” 1 1 1 1 1 THD. /16” /16” /16” /8” /4” DØ 94. Mandrels-Split ITEM # 21-2711 • Mandrel with slot to grip abrasive paper or cloth • Build a suitable diameter for inside finishing Bx/12 Head Tapered SHANK 3 3 3 21-2712 21-2714 /32” /32” /32” 9 HEAD Ø /64” /16” /64” 11 3 STRAIGHT TAPERED STRAIGHT TYPE Head SHORT 95. Mandrels-Screw Taper ITEM # SHANK 3 1 3 1 • Designed for felt buffs, wheels, cylinders and points • Threads are right handed • Use for wheels with 1⁄16” arbor hole Bx/12 21-2716 21-2717 21-2718 21-2719 /32” /8” /8” /32” 3 3 3 3 Head HEAD Ø /16” /16” /16” /16” LONG SHORT LONG TYPE SHORT 96. Mandrels-Pin Chuck D LONG • Chuck mandrel for silicone pins • Pins can be held at various lengths Bx/12 ITEM # 21-2721 21-2722 SHANK 3 3 /32” /32” DØ 2MM 3MM PIN CHUCK PIN CHUCK TYPE Nut 97. Mandrels-Thread with Nut THD • Use for through or blind holes in cylinders • Thread ends are right handed Bx/12 ITEM # 21-2725 21-2726 SHANK 3 1 /32” /8” 3 3 NUT /16” /16” 3 3 THD. /32” /32” 98. Mandrels-Snap-on Snap-on • One piece construction with a snap-on end • Square drive is positive and avoids slippage Bx/12 ITEM # 21-2731 SHANK 3 /32” HEAD Ø SQ/DRIVE 24 © Copyright 2008 previous page next page