1. Prong Lifting Pliers

SETTING TOOLS

®

Special lap joint pliers with a double leaf spring. Provides gentle pressure on the prong and no pressure on the stone to avoid mar or fracture. One jaw is grooved to hold the prong and the other angled to support the under side to raise the prong gently.

5. Setter’s Tube Holder

Comfortably shaped wooden handle has reinforced metal threaded spindle with chuck. Accepts interchangeable collets to hold tubes during stone setting. Sizes from 1/32” to 1/8”. (7 collets)

ITEM #

2. Prong Opening Plier

41-1245

PRONG LIFTING PLIER-5”

DESCRIPTION

ITEM #

49-1011

SETTER’S TUBE HOLDER

DESCRIPTION

Open prongs without fracturing stones. The upper angled jaw has a claw and the lower jaw a groove. The prong is supported at the base to avoid pressure on the top of the stone. Features box joint, double leaf springs and a cushion grip.

6. Peg Clamp Holder

ITEM #

41-1141

DESCRIPTION

Hand held holder with moveable pins to hold any odd shaped parts. Remove handle to fit in a vise. Useful when engraving and setting.

PRONG OPENING PLIER

3. Prong Closing Plier

Single squeeze action closes opposite prongs over stones. Bent jaws with grooved ends securely hold prongs. Features perfectly aligned jaws, double leaf springs and a cushion grip.

ITEM #

23-1059

DESCRIPTION

PEG CLAMP HOLDER

7. Tennis Bracelet Holder-Deluxe

All metal clamp, secures bracelet easily, eliminating the use of shellac. A relief on the diameter provides a space to nest the clasp.

ITEM #

4. Burnishers

41-1142

DESCRIPTION

PRONG CLOSING PLIER

Micro-grained, super hard tungsten carbide will smooth and finish all metals including platinum. Silver or gold will not adhere to this burnisher. Also available in steel.

ITEM #

8. Margin Rollers

23-1061

BRACELET HOLDER - 31/4” DIA.

DESCRIPTION

Individually sized burnishing tool that effectively removes porosity, pits or scratch marks on the inside of rings and bracelets.

ITEM #

23-1071 23-1072 23-1073 23-1074 23-1075 23-1076

DESCRIPTION

TUNGSTEN CARBIDE 5/32” Ø - 8”L

STEEL 1⁄8” Ø BRASS HANDLE - 8”L STEEL ⁄32” Ø BRASS HANDLE- 8”L

5 3 1

23-1333

STEEL 1⁄8” Ø BRASS HANDLE - 51⁄2”L STEEL ⁄16” Ø BRASS HANDLE - 8”L

ITEM #

23-1131 23-1132 23-1133

8 MM

DIAMETER

23-1332

23-1331

SHANK

3 3 3

260

STEEL ⁄4” Ø BRASS HANDLE LG- 8”L

10 MM 12 MM

⁄32” ⁄32” ⁄32”

© Copyright 2008