SOLDERING ® 12. Rotating Soldering Table with Third Hand This rotating soldering table includes an added feature of two third hands for positioning of work pieces. Both third hands have tungsten tips. An accessory for holding the Little Torch is available. See page # 269. Table is 81/2” in diameter. (Torch is not included) ITEM # 50-1066 50-1067 S/BOARD WITH THIRD HAND SOLDERING BOARD ONLY DESCRIPTION 13. Rotating Soldering Table Allows convenient positioning at any angle as the table revolves on ball bearings. Low height and special honeycomb design provides firm holding of small parts. 51/2” diameter. 16. Ceramic Soldering Blocks Non-asbestos blocks, suitable to withstand high temperatures up to 2000°F/1093°C with little or no thermal expansion. A flat working surface that retains heat and cleans easily. ITEM # 50-1061 50-1062 SOLDERING TABLE -COMPLETE REPLACEMENT LAVA DISC DESCRIPTION ITEM # 50-1071 50-1072 61/2” X 3” X 1” 4 /2” X 1” 1 DIMENSIONS TYPE OVAL ROUND 14. Honeycomb Soldering Blocks Most commonly used ceramic block, that has fine pores to accelerate the heat loss from parts being soldered. Holes may be used to retain fine wire articles or used as anchor points. Asbestos free, these blocks withstand temperatures up to 2000°F. 17. Soldering Boards for Platinum Made of super refractory material, these boards meet the demand of high temperature soldering of platinum. Extremely low thermal conductivity without loss of strength, these boards are free of any metallic impurities. ITEM # 50-1074 50-1075 33/4” X 51/2” X 1/2” 51/2” X 73/4” X 1/2” DIMENSIONS ITEM # 50-1086 50-1087 50-1088 4” X 4” X 1/2” 6” X 6” X 1/2” DIMENSIONS 15. Silquar Hi-Heat Boards A non-asbestos soldering board. Withstands heat to a maximum temperature 2000°F/1093°C. Cleans easily with water. 18. Solderite™ Boards- Asbestos Free An entirely new material that is asbestos free, flame resistant and non-combustible. These boards have good heat reflection and insulating qualities. In addition, they will not flake or crumble, making it the best all purpose soldering board. 5” X 5” X 1/2” -JAPAN ITEM # 50-1081 50-1082 50-1083 6” X 6” X /2” 1 DIMENSIONS ITEM # 6” X 12” X 1/2” 50-1091 50-1092 50-1093 DIMENSIONS 6” X 6” X 1/2” 6” X 12” X 1/2” 12” X 12” X 1/2” © Copyright 2008 12” X 12” X 1/2” 270 previous page next page