® 43. 3M ® Deburring Wheels BUFFS DXTXH GRADE • The ideal wheel for sprue removal • May be used for blending and smoothing exterior surfaces • Use with wheel flanges that have a 1” center hole • Max. speed 3,600 rpm ITEM # 25-1971 25-1972 25-1973 8AMED 9SFIN 7SFIN 3MCODE 6” X 1” X 1” 6” X 1” X 1” 6” X 1” X 1” COARSE MEDIUM FINE Order flanges separately pg# 66 44. 3M ® Cut & Polish Wheels ITEM # 3MCODE • Improves blending and polishing after initial deburring • Imparts a relative fineness to the smoothing • Less aggressive action and does not load 25-1977 25-1978 25-1979 5AFIN 5AFIN 5AFIN 1” X 1” X /16” 3” X 3/4” X 1/4” 6” X 1” X 1” 3 DXTXH MEDIUM GRADE MEDIUM MEDIUM 45. 3M ® General Purpose Wheels ITEM # 3MCODE 7AFIN 5AFIN 3AVFIN 7AVFIN 7AVFIN 5AFIN • An all purpose wheel for general applications, sharpening, flash removal and deburring 25-1981 25-1982 25-1984 25-1986 25-1987 25-1988 3 3 DXTXH /4” X 1/4” X 1/16” /4” X 1/4” X 1/16” 3 1 1 1 1 1 MEDIUM V-FINE FINE FINE MEDIUM GRADE Order flanges separately pg# 66 3” X /4” X /4” 4” X /4” X /8” 4” X /2” X /8” 46. Artifex Elastic Bond Wheels 6” X 1” X 1” MEDIUM • Silicon carbide abrasive bonded on a non-clogging spongy base • Resists snagging during fine deburring • Cushion effect eliminates gouging on precious metals Size: 100 x 20 x 6 mm ITEM # 25-1991 25-1992 25-1993 GRIT 80 150 240 COARSE MEDIUM FINE GRADE Size: 150 x 20 x 6 mm ITEM # 25-1996 25-1997 150 240 GRIT GRADE FINE MEDIUM 47. IkFlex Elastic Bond Wheels Size: 100 x 20 x 6 mm • Silicon carbide abrasive in a non-clogging bond • Extra flexible for fine finishing of precious metals ITEM # 25-2011 GRIT 80 150 240 25-2012 25-2013 COARSE MEDIUM FINE GRADE Size: 150 x 20 x 6 mm ITEM # 25-2016 25-2017 25-2018 80 GRIT 150 240 COARSE MEDIUM FINE GRADE © Copyright 2008 67 previous page next page