30. Carbide Burs BURS ® Designed to cut with confidence, these carbide burs yield high productivity. Exceptional durability and wear resistance enables you to cut and finish at the same time. Burs have 3/32” shank size for use on friction grip high speed flexshaft handpieces. Speed 30,000- 35,000 rpm. Bx/6. ISO 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 021 023 027 MM 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.10 2.30 2.70 ROUND/123 ITEM # 26-5002 26-5003 26-5004 26-5005 26-5006 26-5007 26-5008 26-5009 26-5010 26-5011 26-5012 26-5013 26-5014 26-5015 26-5016 26-5017 26-5018 26-5019 26-5021 26-5023 26-5027 ISO 006 007 008 009 010 012 014 016 018 MM 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.60 1.80 INV.CONE / 124 ITEM # 26-5106 26-5107 26-5108 26-5109 26-5110 26-5112 26-5114 26-5116 26-5118 ISO 008 009 010 012 014 016 018 MM 0.80 0.90 1.10 1.20 1.40 1.60 1.80 CYL. SQ.CROSS CUT #137 ITEM # 26-5208 26-5209 26-5210 26-5212 26-5214 26-5216 26-5218 ISO 012 MM 1.20 WHEEL CUT #125 ITEM # 26-5412 USE OF CARBIDE BURS Ensure that the handpiece collet runs true without any axial play Insert the bur shank as far as possible in the collet Avoid levering with the bur as this may cause breakage Eye protection is recommended To produce optimum results, burs must be run at their recommended speeds Excessive pressure must be avoided to prevent heat build up ISO 008 009 010 012 014 016 018 021 023 MM 0.80 0.90 1.00 1.20 1.40 1.60 1.80 2.10 2.30 CONE CROSS CUT #138 ITEM # 26-5308 26-5309 26-5310 26-5312 26-5314 26-5316 26-5318 26-5321 26-5323 31. Rotating Bur Stand Tiered, heavy duty plastic stand. Accommodates 150 burs 3/32” shank. The revolving design makes it easy to choose the right bur. Rectangular plastic stand to hold /32” shank size burs. Keeps burs organized and protects the cutting edges from damage. 3 32. Plastic Bur Stands 33. Acrylic Bur Stand Clear acrylic stand with 36 holes to store 3/32” shank size burs. ITEM # 26-2391 BUR STAND DESCRIPTION ITEM # FOUR TIERS 26-2393 26-2392 DESCRIPTION 3 LARGE- 5 /4” X 3 /2” SMALL- 43/4” X 3” 1 ITEM # 26-2394 41/2” X 3” X 3/4” DIMENSIONS 34. Wooden Bur Boxes Hardwood box with hinged cover to store burs with 3 /32” shank. Keeps burs organized and protected. 35. Wooden Bur Block Slanted, hardwood block stand, with non-slip rubber grip base. Organizes burs, drills, files, and brushes of either 3/32” or 1/8” shanks. ITEM # 26-2396 26-2397 26-2398 DESCRIPTION BUR BOX- 36 HOLES BUR BOX- 72 HOLES BUR BOX- 100 HOLES ITEM # 26-2399 BUR BLOCK-88 HOLES © Copyright 2008 DESCRIPTION 78 previous page next page