® 3. Standard Vulcanizer An excellent vulcanizer in a rigid box frame. Cast iron construction. The upper platen slides on twin guides and is raised and lowered by a central screw. All the electronic controls are enclosed in the base. CLA approved. Features: • Steel platens measure 5” X 8” • Maximum opening 3” • Platen alignment by guide bars • Ceramic heating element • Thermostat, pilot and on/off switch • Temperature range 100°F-450°F • Dimensions 15” X 8” X 18” • Wt. 35 lbs 4. Deluxe Vulcanizer CASTING A robust heavy duty vulcanizer for medium production. One piece ribbed cast iron construction with dual guide bars for accurate alignment and even pressure distribution. All the electronic controls are enclosed in the base. CLA approved. Features: • Steel platens measure 6” X 8” • Maximum opening 4” • Twin guide bars with pressure screw • Ceramic heating element • Thermostat, pilot lamp, and on/off switch • Temperature range 100°F-450°F • Dimensions 14” X 9” X 20” • Wt. 50 lbs ITEM # 27-1051 27-1052 27-1053 110V / 60HZ SPECIFICATION ITEM # 220V / 50HZ 27-1056 27-1057 27-1058 110V / 60HZ SPECIFICATION HEATING ELEMENT 220V / 50HZ HEATING ELEMENT 5. Duplex Vulcanizer- Italy An excellent vulcanizer for heavy duty production. Time tested and proven to be the best the world over. All units are built to precision standards and factory calibrated. The Duplex multifunction vulcanizer is designed to operate in two modes using the same machine. Basic Version: is an open frame with clear view to position the flask in the center of the platen. Features: • Steel platens measure 150 x 150 MM • Digital thermostat • Built in timer 0-120 mins. • Precise control up to 392° F/ 200° C ±°1 C • Analog timer -120 minutes • Dimensions 280 X 210 X 450 MM • Wt. 56 lbs Deluxe Version: This unit has the same structure as the basic version but is provided with an integral guard to prevent accidental contact with the heating plates. Features: • Steel platens measure 150 x 150 MM • Digital thermostat • Built in timer 0-120 mins. • Precise control up to 392° F/ 200° C ±°1 C • Analog timer -120 minutes Digital thermostat • Dimensions 280 X 210 X 450 MM • Wt. 60 lbs ITEM # 27-1061 27-1062 BASIC MODEL 110V / 60HZ SPECIFICATION ITEM # BASIC MODEL 220V / 50HZ 27-1066 27-1067 DELUXE MODEL 110V / 60HZ SPECIFICATION See the operations in two Modes as described below. DELUXE MODEL 220V / 50HZ In this mode the upper heating platen (2) transmits the heat to the flask(4) while the central piston (3) descends inside the flask, to compress the rubber mold (6). Use this method for cylindrical or rectangular flasks with metal spacers sliding inside (7) (8). • Pressure screw (1) • Flask (4) • Lower heating plate (5) • Kit attachment screws (7) © Copyright 2008 MODE-I In this mode the descent of the central piston can be blocked by using a kit that is supplied with the machine. The kit consists of a metal plate 150 x 150mm (3) to fit to the upper heating platen (2). In this mode the upper heating platen not only transmits the heat but also compresses the rubber mold (6). This is the best method for using rectangular flasks without internal sliding spacers. MODE-II 83 previous page next page